Anthracite Grey Ral 7016 Washing Machine Fridge Radiator Renovator Spray Paint

Monstercolors White Goods Fast drying Gloss acrylic Paint for painting and renovation of fridges, refrigerators, washing machines radiators and other household appliances. Doesn’t become yellow, has good thermal conductivity. Perfect for renovation of outside metal layers of houlsehold appliances. Provides smooth, durable sufrace, you can easly clean.

Quick and convenient way to restore or refurbish 'white goods' enamel paint work
Extremely hard wearing, water resistant finish Long lasting finish - no yellowing or fading Prevents rust and corrosion Ideal for appliance exteriors - fridges, freezers, washing machines, etc. (not suitable areas exposed to heat e.g. ovens & hobs)

Heat resistance up to 100°C
Directly to household appliances
Resistant to moisture and rust
Creates smooth, glossy surface
colour: Anthracite Grey Ral 7016
Fast drying time: 5-10 minutes !
Touch dry: 15-30 min
Hardened: 16-24 h
Efficiency 1,5 – 2m2 depending on type of surface by one application Hard acrylic film resistant to water and abrasion For indoor and outdoor use Capacity 400 ml

Recommended substrate conditions:
Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600).

Method of use:
You can easily cover already painted surface by any other paint. Apply product at temperature about 10-25°C (optimum temperature for good varnish drying). Drying time depends also on air humidity and product density. Painting should be made in well ventilated room. Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. Perform the test spray. Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimetres. Following applying each layer, wait a few minutes. Following the completion, clean the nozzle. Put the container upside down, pressing the nozzle for the period of three seconds.

Please note this is not a touch up paint for your appliance this is intended to refurbish (spray entire appliance) 

Health & Safety

Protective Mask and Goggles should be worn when spraying

Spray only in well ventilated area